The first time you plug it in, you can choose to always connect it to the VM rather than asking each time. The one trick I use to make things easier is to plug in the USB cable AFTER the virtual machine is completely powered on or resumed. I just turn up the volume and listen to the whine of the R/C model's motor Nice graphics require power, that power makes heat, and that heat has to go somewhere. With either the Nvidia or the Intel card, the laptop fans will kick on pretty quickly. I didn't detect a big difference between 1 or 2 virtual cores allocated to the virtual machine. The CPU cores are barely taxed while running RF7, I bet slower and older CPUs worked just fine. When I am using the internal display, running it at at the recommended resolution (on the 15" MBPr this is simulates 1440x900) seemed to help. I also run RF7 in full screen mode (alt-enter). No matter what I did, the air race field with several 3D objects (the towers that mark the course) close to the camera always shows quite a bit of jitter when the camera is panning quickly. Among the 3D fields, lots of object close to the camera creates lots of jitter and tearing.
![mac os boot camp 40gb needed mac os boot camp 40gb needed](https://www.askdavetaylor.com/0-blog-pics/apple-boot-camp.png)
Unsurprisingly, photo fields work well with no matter what. Some airfields are harder on the graphics subsystem than others. Running in RF7 Fusion will still benefit from it. Buy the biggest, baddest graphics card that you can afford. If you have a desktop Mac, follow the advice of the Windows folks. It is still not what I would call "smooth" when panning, but I haven't ever seen RF7 on a real graphics card so maybe I am being picky. By "helps" I mean that the performance gets a bit better and the fans don't run as loud. With either card, a lower resolution external monitor helps. The "highest" setting is very pretty when things aren't moving a lot, but I never saw it above about 50fps. But I find the tearing distracting so I like vertical sync on. With the Nvidia card, "medium" and "high" worked well, I consistently got frame rates from 100-280. If I turn off vertical sync, I get a littler higher than 60fps, but tearing is noticeable. With the Intel card, I don't think running above "medium" is usable. It does ok at "medium" The optional discrete Nvidia card does better, but still struggles above "high". * An Intel Iris Pro is not a high end 3D graphics card. Running on lower resolution external displays (My TV will run at 1920x1080) helps. No matter what, the graphics card has to drive those pixels. * The internal LCD display contains a lot of pixels. Not counting the overhead imposed by Fusion, there are two major problems bottlenecks with running on the late 2013 retina MacBook Pros RF7 Interface Edition (but I'm 99.9% sure the other editions will work just fine too) You will not get DirectX working in the Windows guest unless you install VMware Tools. VMware Tools installed in the Windows guest. "Accelerate 3D graphics" turned on, "use full resolution for Retina" turned OFF. Internal display settings are set to "best for display" (this simulates 1440x900 on the 15" screen). For a virtual machine platform, I'm using Fusion 6.0.3. It has only the integrated graphics card, the Intel Iris Pro. Late 2013 MacBook Pro Retina with 2.6Ghz i7 CPU. I know it would give me better graphics performance. Don't post to tell me I should use bootcamp.
![mac os boot camp 40gb needed mac os boot camp 40gb needed](https://mymacisslow.com/wp-content/uploads/2018/04/fix-macos-high-sierra.jpg)
If you have Fusion and RF7 specific questions, please post below and I'll do my best to answer them. With either card, 3D airfields with lots of objects close to the camera show jitter. In this config, external monitors with lower resolution that the internal display are still better, but the difference (in fan speed and jitter artifacts) isn't as big as with the Intel. With the Nvidia card, running at "high" seems to be the sweet spot or "medium" if you want less fan noise and smoother panning. I'm sure the experience will be similar for external monitors with similar resolution. Running on an HDTV at 1080p and 720p got me a little less fan noise and a slightly less visual jitter that runninng on the internal display. I think it is very usable on the internal display. With only the integrated Intel card, RF7's "medium" graphics setting seems to be the best choice. I did get access to an identical MBPr that had the discrete Nvidia 750M card and I also tested both cards with an external monitor (an HDTV at 1080p and 720p). The biggest bottleneck is the lack of a "real" graphics card in my laptop. In another thread, I promised that I would document my setup and answer questions. I have successfully used VMware Fusion 6 (and 7) on a recent Macbook Pro retina (MPBr).